2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144599
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144605
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  1. B152774
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

  1. B152779
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


5. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

  1. B144607E02
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B144602
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.


6. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transaxle)

  1. B152776E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B152777
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the position indicator housing assembly as shown in the illustration.


7. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  1. B144604
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


8. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)

  1. B144604
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


9. REMOVE CONSOLE BOX POCKET
  1. Remove the console box pocket.


10. REMOVE CONSOLE BOX CARPET

  1. B134004
    Remove the console box carpet.


11. REMOVE CONSOLE BOX ASSEMBLY

  1. B134002E01
    Remove the 2 screws <F>.

  1. B149935E03
    Disengage the clamp.

  1. Remove the 2 bolts <G> and the console box assembly.


12. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY

  1. C132670E01
    Loosen the lock nut and the No. 1 wire adjusting nut of the No. 1 parking brake cable assembly.

  1. C138184
    Separate the No. 3 parking brake cable assembly from the parking brake equalizer.


13. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY

  1. C138185
    Separate the No. 2 parking brake cable assembly from the parking brake equalizer.


14. REMOVE PARKING BRAKE EQUALIZER

  1. C138196
    Slide the rubber boot as shown in the illustration.

  1. C132657
    Remove the parking brake equalizer from the No. 1 parking brake cable assembly.


15. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

  1. C147262
    Disconnect the parking brake switch connector.

  1. Remove the 2 bolts and the parking brake lever sub-assembly.

← REMOVAL (Jun 2006 – Sep 2006)REMOVAL (from Jun 2009) →