2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE CONSOLE BOX ASSEMBLY

HINT:
  1. Refer to the procedures up to "REMOVE REAR CONSOLE BOX". (except 2GR-FE RHD Click here)
  2. Refer to the procedures up to "REMOVE REAR CONSOLE BOX". (for 2GR-FE RHD Click here)


3. REMOVE YAW RATE AND ACCELERATION SENSOR

  1. C145963
    Disconnect the yaw rate and acceleration sensor connector.

  1. Remove the 2 bolts and yaw rate and acceleration sensor.

  1. C145964
    Remove the 2 nuts and yaw rate and acceleration sensor from the bracket.

← REMOVAL (Jun 2006 – Sep 2006)REMOVAL (from Jun 2009) →