2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE CONSOLE BOX ASSEMBLY

HINT:
Refer to the procedures up to "REMOVE REAR CONSOLE BOX". (Click here)


3. REMOVE YAW RATE AND ACCELERATION SENSOR

  1. C145963
    Disconnect the yaw rate and acceleration sensor connector.

  1. Remove the 2 bolts and yaw rate and acceleration sensor.

  1. C145964
    Remove the 2 nuts and yaw rate and acceleration sensor from the bracket.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →