2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT CRANKSHAFT POSITION SENSOR

  1. A094922
    Using an ohmmeter, measure the resistance between the terminals.

    Resistance:
    1,630 to 2,740 Ω at cold
    2,065 to 3,225 Ω at hot

    NOTICE:
    The terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    If the resistance is not as specified, replace the sensor.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →