INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL CRANKSHAFT POSITION SENSOR |
Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.
Install the crankshaft position sensor with the bolt.

- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Connect the crankshaft position sensor connector.
| 2. INSTALL COOLER COMPRESSOR ASSEMBLY |
- HINT:
- (Click here)
| 3. INSTALL GENERATOR ASSEMBLY |
- HINT:
- (Click here )
