2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2006


1. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

  1. B136561
    Install the rear side seatback assembly with the bolt.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


2. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

HINT:
Use the same procedure for the RH and LH side.


3. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH

  1. B136539
    Install the separate type rear seatback assembly with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


4. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH

  1. B134700
    Install the separate type rear seatback assembly with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


5. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Armrest)

6. INSTALL REAR SEAT HEADREST ASSEMBLY

7. INSTALL REAR SEAT CUSHION ASSEMBLY

  1. B140584E01
    Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the bench type rear seat cushion assembly, make sure that the seat belt buckle is not under the bench type rear seat cushion assembly.

← REASSEMBLY (from Jun 2009)COMPONENTS (Jun 2006 – Sep 2006) →