2006-2011 Camry Aurion · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL REAR SEPARATE TYPE SEATBACK COVER LH

  1. B140575E01
    Using hog ring pliers, install the rear separate type seatback cover with 9 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


2. INSTALL REAR SEPARATE TYPE SEATBACK COVER RH (w/o Center Armrest)

  1. B149614E02
    Using hog ring pliers, install the rear separate type seatback cover to the seatback pad with 11 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


3. INSTALL REAR SEPARATE TYPE SEATBACK COVER RH (w/ Center Armrest)

  1. B140576E01
    Using hog ring pliers, install the rear separate type seatback cover to the seatback pad with 9 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B140577E01
    Using hog ring pliers, install the rear separate type seatback cover to the seatback pad with 7 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


4. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH

  1. B136559
    Install the rear seatback frame sub-assembly LH.


5. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH

  1. B136551
    Install the rear seatback frame sub-assembly RH.


6. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)

  1. B258364
    Engage the 2 claws to install each rear seat headrest supports.

  1. B140578E01
    Using hog ring pliers, install the rear separate type seatback cover to the seatback frame with 6 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B149601
    Engage the 2 hooks.


7. INSTALL REAR SEATBACK LOCK BEZEL UPPER (for LH Side)

  1. B136555
    Engage the 4 claws to install the rear seatback lock bezel upper.


8. INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)

  1. B251858E01
    Engage the 2 claws to install each rear seat headrest supports.

  1. B140579E01
    Using hog ring pliers, install the rear separate type seatback cover to the seatback frame with 7 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B149602
    Engage the 2 hooks.


9. INSTALL REAR SEATBACK LOCK BEZEL UPPER (for RH Side)

  1. B136547
    Engage the 4 claws to install the rear seatback lock bezel upper.


10. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

  1. B139124
    Install the rear seat shoulder belt guide RH with the 2 screws.


11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

  1. B136554
    Seatback:

    1. Install the rear seat shoulder belt guide LH with the 2 screws.

  1. B136562
    Side Seatback:

    1. Install the rear seat shoulder belt guide LH with the 2 screws.


12. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (w/ Center Armrest)

  1. B149575
    Engage the 4 claws to install the rear seat center armrest cup holder.


13. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (w/ Center Armrest)

  1. B136546
    Install the bush.

  1. B149603E01
    Install the rear center seat armrest assembly as shown in the illustration.


14. INSTALL REAR SEATBACK HINGE COVER (w/ Center Armrest)

  1. B149604
    Install the rear seatback hinge cover.

  1. B136543
    Install the bolt and bush.


15. INSTALL NO. 1 SEAT ARMREST CAP (w/ Center Armrest)

  1. B149605
    Install the No. 1 seat armrest cap.


16. INSTALL REAR BENCH TYPE SEAT CUSHION COVER

  1. Using hog ring pliers, install 16 new hog rings.

    B140580E01

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Using hog ring pliers, install the rear bench type seat cushion cover to the seat cushion pad with 36 new hog rings.

    B140581E01

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

← REASSEMBLY (Jun 2006 – May 2009)INSTALLATION (from Jun 2006) →