REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
 |
- HINT:
- Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly (Click here).
| 2.
REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
|
 |
- Remove the screw <H> and the side No. 1 defroster nozzle duct.
| 3.
REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
|
 |
- Remove the screw <H> and the side No. 2 defroster nozzle duct.
| 4.
REMOVE DEFROSTER NOZZLE ASSEMBLY
|
 |
- Remove the 3 screws <H> and the defroster nozzle assembly.
| 5.
REMOVE NO. 1 HEATER TO REGISTER DUCT
|
 |
- Remove the 3 screws <H> and the No. 1 heater to register duct.
| 6.
REMOVE NO. 3 HEATER TO REGISTER DUCT
|
 |
- Remove the 3 screws <H> and the No. 3 heater to register duct.
| 7.
REMOVE NO. 2 HEATER TO REGISTER DUCT
|
 |
- Remove the 2 screws <H> and the No. 2 heater to register duct.
| 8.
REMOVE NAVIGATION ANTENNA ASSEMBLY |
 |
- Disengage the 3 clamps.
Remove the 2 screws and navigation antenna assembly.