U0073/94 Control Module Communication Bus OFF
Diagnostic trouble codes · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
DESCRIPTION
- The skid control ECU receives the signal sent from the ECM via the CAN communication system.
- When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.
| DTC No. |
DTC Detecting Condition |
Trouble Area |
| U0073/94 |
When either of the following is detected:
|
|
INSPECTION PROCEDURE
Proceed to CAN communication system troubleshooting (Click here for LHD, Click here for RHD).- HINT:
- When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.