2006-2011 Camry Aurion · Service Manual BRAKE

C1201/51 Engine Control System Malfunction

Diagnostic trouble codes · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

If a malfunction in the engine control system is detected, the operations of VSC and TRC are prohibited by the fail safe function (Click here).
When the signals from the engine are input normally, the fail safe is cancelled and the DTC is not stored.
DTC No.
DTC Detecting Condition
Trouble Area
C1201/51
A trouble signal in the engine control system is input.
Engine control system

INSPECTION PROCEDURE


1. CHECK DTC (ENGINE CONTROL SYSTEM)
  1. Clear the DTCs (engine control system) (Click here for 2AZ-FE, or Click here for 2GR-FE).

  1. Perform a road test.

  1. Check for the DTCs (engine control system).


Result:
Result
Proceed to
DTC (engine control system) is not output (for 2AZ-FE)
A
DTC (engine control system) is not output (for 2GR-FE)
B
DTC (engine control system) is output (for 2AZ-FE)
C
DTC (engine control system) is output (for 2GR-FE)
D



B
REPLACE ECM (for 2GR-FE) (Click here)

C
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (ENGINE CONTROL SYSTEM for 2AZ-FE) (Click here)

D
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (ENGINE CONTROL SYSTEM for 2GR-FE) (Click here)
A

REPLACE ECM (for 2AZ-FE) (Click here)


← C1201/51 Engine Control System Malfunction (Jun 2006 – Sep 2006)C1201/51 Engine Control System Malfunction (from Jun 2009) →