2006-2011 Camry Aurion · Service Manual BRAKE

43 ABS Control System Malfunction

Diagnostic trouble codes · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS control system.
DTC No.
DTC Detection Condition
Trouble Area
43
Malfunction in the ABS control system
ABS control system

INSPECTION PROCEDURE


1. CHECK ABS CONTROL SYSTEM
  1. Clear the DTCs (Click here).

  1. Turn the ignition switch on (IG).

  1. Check if the same DTC is recorded (Click here).

    Result:
    Result
    Proceed to
    DTC (ABS control system DTC) is not output
    A
    DTC (ABS control system DTC) is output
    B



B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (BRAKE CONTROL SYSTEM) (Click here)
A


2. CONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Start the engine.

  1. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

  1. Check if the same DTC is recorded (Click here).

    Result:
    Result
    Proceed to
    DTC (43) is not output
    A
    DTC (43) is output
    B



B
REPLACE BRAKE ACTUATOR ASSEMBLY (Click here)
A

END


← 43 ABS Control System Malfunction (Oct 2006 – May 2009)C0200/31 Right Front Wheel Speed Sensor Signal Malfunction (+ 7 more codes) (Jun 2006 – Sep 2006) →