Operate the power seat switch knob and move the seat to the position farthest forward.
Using a screwdriver, detach the 4 claws and remove the outer seat track bracket cover.
HINT:
Tape the screwdriver tip before use.
3.
REMOVE INNER SEAT TRACK BRACKET COVER
Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.
4.
REMOVE FRONT SEAT ASSEMBLY
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).
Disconnect the connectors under the seat. Then remove the front seat assembly.
5.
REMOVE RECLINING POWER SEAT SWITCH KNOB
Using a screwdriver, detach the reclining power seat switch knob.
HINT:
Tape the screwdriver tip before use.
6.
REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Using a screwdriver, detach the slide and vertical power seat switch knob.
HINT:
Tape the screwdriver tip before use.
7.
REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY
Disconnect the 2 hooks.
Remove the 5 screws.
Disengage the 2 claws and separate the front seat cushion shield assembly.
Disconnect the connector from the front power seat lumbar switch.
8.
REMOVE POWER SEAT SWITCH
Remove the 3 screws.
Disconnect the connector and remove the power seat switch.