REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1.
REMOVE RAIN SENSOR COVER |
 |
- Remove the rain sensor cover.
| 2.
REMOVE RAIN SENSOR |
 |
- Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.
- Disconnect the connector and remove the rain sensor.
| 3.
REMOVE RAIN SENSOR TAPE |
 |
- NOTICE:
- The rain sensor tape can be reused, however, replace it with a new one if it is dirty or damaged.
- HINT:
- This step should be performed only when the rain sensor tape needs to be replaced.
Remove the rain sensor tape.