DISASSEMBLY
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. REMOVE AIR DUCT SUB-ASSEMBLY |
Release the 4 claws and remove the air duct sub-assembly.

| 2. REMOVE AIR FILTER COVER PLATE |
Release the 2 claws and remove the air filter cover plate.

| 3. REMOVE CLEAN AIR FILTER |
Remove the clean air filter as shown in the illustration.

| 4. REMOVE AIR INLET SERVO MOTOR |
Remove the 3 screws and air inlet servo motor.

| 5. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
Remove the 3 screws and blower with fan motor sub-assembly.

