REASSEMBLY
Removal / installation · Vehicles built Jun 2006 – Sep 2006
| 1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
Install the blower with fan motor sub-assembly with the 3 screws.

| 2. INSTALL AIR INLET SERVO MOTOR |
Install the air inlet servo motor with the 3 screws.

| 3. INSTALL CLEAN AIR FILTER |
Install the clean air filter as shown in the illustration.

| 4. INSTALL AIR FILTER COVER PLATE |
Engage the 2 claws to install the air filter cover plate.

| 5. INSTALL AIR DUCT SUB-ASSEMBLY |
Engage the 4 claws to install the air duct sub-assembly.

