2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type)

  1. E134911
    Install the air conditioning control assembly as shown in the illustration.


2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)

  1. E196516
    Install the air conditioning control assembly as shown in the illustration.


3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

  1. E129990
    Install the air conditioning control assembly as shown in the illustration.


4. INSTALL RADIO NO. 2 BRACKET (for Radio Receiver Type)

  1. E129177
    Install the radio No. 2 bracket with the 3 bolts and 2 screws.


5. INSTALL RADIO NO. 2 BRACKET (for Radio and Display Type)

  1. E195857
    Install the radio No. 2 bracket and radio receiver panel with the 4 bolts and 2 screws.


6. INSTALL RADIO NO. 2 BRACKET (w/ Navigation System)

  1. E129207
    Install the radio No. 2 bracket with the 3 bolts and 2 screws.


7. INSTALL RADIO NO. 1 BRACKET (for Radio Receiver Type)

  1. E129176
    Install the radio No. 1 bracket with the 3 bolts and 2 screws.


8. INSTALL RADIO NO. 1 BRACKET (for Radio and Display Type)

  1. E195856
    Install the radio No. 1 bracket and radio receiver panel with the 4 bolts and 2 screws.


9. INSTALL RADIO NO. 1 BRACKET (w/ Navigation System)

  1. E129206
    Install the radio No. 1 bracket with the 3 bolts and 2 screws.


10. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (for Radio Receiver Type)

  1. E129175
    Connect each connector.

  1. Engage the 4 clips.

  1. Install the radio receiver with heater control panel assembly with the 4 bolts.


11. INSTALL RADIO AND DISPLAY WITH HEATER CONTROL PANEL ASSEMBLY (for Radio and Display Type)

  1. E195855
    Connect each connector.

  1. Engage the 6 clips.

  1. Install the radio and display with heater control panel assembly with the 4 bolts.


12. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System)
  1. Connect each connector.

  1. E137564
    Engage the 4 clips.

  1. Install the navigation receiver with heater control panel assembly with the 4 bolts.


13. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (except 2GR-FE RHD)
  1. Connect the connector.

  1. B152785
    Engage the 7 clips and install the instrument panel No. 2 register assembly.


14. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (for 2GR-FE RHD)
  1. Connect each connector.

  1. B158961
    Engage the 11 claws and install the instrument panel No. 2 register assembly.


15. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (except 2GR-FE RHD)
  1. Connect each connector.

  1. B133997E01
    Engage the 4 claws.

  1. Install the upper console panel sub-assembly with the 2 screws <F>.


16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for 2GR-FE RHD)
  1. Connect the connector.

  1. B158962
    Engage the 10 claws and install the upper console panel sub-assembly.


17. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)
for Manual Transaxle RHD: (Click here)

18. INSTALL UPPER CONSOLE PANEL FRONT GARNISH (for 2GR-FE RHD)

  1. B158963
    Connect each connector.

  1. Engage the 6 claws and install the upper console panel front garnish.


19. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)

20. INSTALL UPPER CONSOLE PANEL (except 2GR-FE RHD)
for Manual Transaxle RHD: (Click here)

21. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226063
    Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.


22. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (except 2GR-FE RHD)

  1. B226064
    Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.


23. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 2GR-FE RHD)

  1. B158971
    Install the shift lever knob sub-assembly.


24. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (except 2GR-FE RHD)
for Automatic Transaxle LHD: (Click here)
for Automatic Transaxle RHD: (Click here)
for Manual Transaxle RHD: (Click here)
← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (Jun 2006 – Sep 2006) →