INSTALLATION
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ CD Player) |
 |
- Install the air conditioning control assembly as shown in the illustration.
| 2.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System) |
 |
- Install the air conditioning control assembly as shown in the illustration.
| 3.
INSTALL RADIO NO. 2 BRACKET (w/ CD Player)
|
 |
- Install the radio No. 2 bracket with the 3 bolts and 2 screws.
| 4.
INSTALL RADIO NO. 2 BRACKET (w/ Navigation System)
|
 |
- Install the radio No. 2 bracket with the 3 bolts and 2 screws.
| 5.
INSTALL RADIO NO. 1 BRACKET (w/ CD Player)
|
 |
- Install the radio No. 1 bracket with the 3 bolts and 2 screws.
| 6.
INSTALL RADIO NO. 1 BRACKET (w/ Navigation System)
|
 |
- Install the radio No. 1 bracket with the 3 bolts and 2 screws.
| 7.
INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ CD Player)
|
 |
- Connect each connector.
Engage the 4 clips.
Install the radio receiver with heater control panel assembly with the 4 bolts.
| 8.
INSTALL NAVIGATION RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY (w/ Navigation System)
|
 |
Connect each connector.
- Engage the 4 clips.
Install the navigation receiver with heater control panel assembly with the 4 bolts.
| 9.
INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
|
 |
Connect the connector.
- Engage the 7 clips and install the instrument panel No. 2 register assembly.
| 10.
INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
|
 |
Connect each connector.
- Engage the 2 claws and 2 clips.
Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.
| 11.
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY
|
 |
- Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 12.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY
|
 |
- Engage the 2 claws and the 5 clips to install the position indicator housing assembly as shown in the illustration.
| 13.
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 14.
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 15.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Install the shift lever knob sub-assembly.