REASSEMBLY
Removal / installation · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1.
INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling) |
 |
Install a new headlight leveling motor base packing.
- NOTICE:
- After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.
| 2.
INSTALL HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling) |
 |
Engage the tip of the headlight leveling motor with the reflector.
- Turn the headlight leveling motor to install it.
| 3.
INSTALL CLEARANCE LIGHT BULB |
 |
Install the clearance light bulb to the clearance light socket.
- Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow and install them as a unit.
| 4.
INSTALL FRONT TURN SIGNAL LIGHT BULB |
 |
Install the front turn signal light bulb to the front turn signal light socket.
- Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.
| 5.
INSTALL NO. 1 HEADLIGHT BULB |
 |
Install the No. 1 headlight bulb to the headlight bulb socket.
- Install the No. 1 headlight bulb and the headlight bulb socket as shown in the illustration.
Connect the headlight socket cover.
| 6.
INSTALL NO. 2 HEADLIGHT BULB |
 |
- Install the No. 2 headlight bulb as shown in the illustration.