2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)
  1. Install a new headlight leveling motor base packing.


2. INSTALL HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)
  1. Engage the tip of the headlight leveling motor with the reflector.

  1. E192197
    Turn the headlight leveling motor to install it.


3. INSTALL CLEARANCE LIGHT BULB
  1. Install the clearance light bulb to the clearance light socket.

  1. E192195
    Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


4. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.

  1. E192193
    Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


5. INSTALL NO. 1 HEADLIGHT BULB
  1. Install the No. 1 headlight bulb to the headlight bulb socket.

  1. Connect the connector.

  1. E136241
    Install the No. 1 headlight bulb and headlight bulb socket as shown in the illustration.

  1. Connect the headlight socket cover.


6. INSTALL NO. 2 HEADLIGHT BULB

  1. E192191
    Install the No. 2 headlight bulb as shown in the illustration.

← REASSEMBLY (Jun 2006 – May 2009)INSTALLATION (Jun 2006 – May 2009) →