2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL TCM
  1. Install the TCM to the transaxle.

  1. C139840E02
    Install and tighten the 2 bolts in the order shown in the illustration.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

  1. C139242
    Connect the connector to the TCM.

  1. Turn the lock lever and secure the connector with the lock lever.


2. INSTALL INTAKE AIR RESONATOR SUB-ASSEMBLY

  1. A133928
    Install the intake air resonator with the bolt and clip.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }


3. INSTALL NO. 1 AIR CLEANER INLET

  1. A132970
    Install the No. 1 air cleaner inlet with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }


4. INSTALL AIR CLEANER INLET ASSEMBLY

  1. A132969
    Install the air cleaner inlet with the clamp and 2 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }


5. INSTALL BATTERY

  1. A132972
    Install the battery and battery tray.

  1. Install the battery clamp with the bolt and nut.

    Torque:
    Bolt:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }
    Nut:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }


6. INSTALL COOL AIR INTAKE DUCT SEAL

  1. A141576E01
    Install the intake duct seal with the 7 clips.


7. PERFORM TCM REGISTRATION

HINT:
Click here.

← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (from Oct 2006) →