DISASSEMBLY
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE REAR BUMPER RETAINER UPPER |
 |
- Disengage the claw and remove the rear bumper retainer upper.
| 2.
REMOVE REAR COMBINATION LIGHT GASKET |
 |
- Remove the rear combination light gasket.
- NOTICE:
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
| 3.
REMOVE REAR TURN SIGNAL LIGHT BULB |
 |
- Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and disconnect them as a unit.
Remove the rear turn signal light bulb from the rear turn signal light socket.
| 4.
REMOVE REAR LIGHT GASKET |
 |
- Remove the rear light gasket.
- NOTICE:
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.
| 5.
REMOVE BACK UP LIGHT BULB |
 |
- Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and disconnect them as a unit.
Remove the back up light bulb from the rear light socket and wire.
| 6.
REMOVE REAR LIGHT SOCKET AND WIRE |
 |
- Disconnect the connector and remove the rear light socket and wire.