Disengage the claw and remove the rear bumper upper side retainer.
2.
REMOVE REAR TURN SIGNAL LIGHT BULB
Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.
Remove the rear turn signal light bulb from the rear turn signal light socket.
3.
REMOVE REAR COMBINATION LIGHT GASKET
Remove the rear combination light gasket.
NOTICE:
Be sure to remove all traces of the old gasket from the body.
Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
4.
REMOVE BACK UP LIGHT BULB
Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.
Remove the back up light bulb from the rear light socket and wire.
5.
REMOVE REAR FOG LIGHT BULB
Turn the rear fog light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.
Remove the rear fog light bulb from the rear light socket and wire.
6.
REMOVE REAR LIGHT SOCKET AND WIRE
Disconnect the connector and remove the rear light socket and wire.
7.
REMOVE REAR LIGHT GASKET
Remove the rear light gasket.
NOTICE:
Be sure to remove all traces of the old gasket from the body.
Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.