2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL REAR LIGHT SOCKET AND WIRE

  1. E134273
    Connect the connector and install the rear light socket and wire.


2. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb to the rear light socket and wire.

  1. E134272
    Turn the back up light bulb and rear light socket and wire in the direction indicated by the arrow and install them as a unit.


3. INSTALL REAR LIGHT GASKET

  1. E133814
    Install a new rear light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.


4. INSTALL REAR TURN SIGNAL LIGHT BULB

  1. E134249
    Install the rear turn signal light bulb to the rear turn signal light socket.

  1. Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow and install them as a unit.


5. INSTALL REAR COMBINATION LIGHT GASKET

  1. E134247
    Install a new rear combination light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.


6. INSTALL REAR BUMPER RETAINER UPPER

  1. E134246
    Engage the claw and install the rear bumper retainer upper.

← DISASSEMBLY (from Jun 2009)REASSEMBLY (from Jun 2009) →