2006-2011 Camry Aurion · Service Manual HEATER & AIR CONDITIONING SYSTEM

REASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. INSTALL CONTROL KNOB SUB-ASSEMBLY

NOTICE:
When reassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

  1. Driver Side:

    1. Engage the dual push switch with dial on the switch control sub-assembly.

    2. E135069
      Engage the 3 claws.

    3. E135068
      Engage the 3 claws and install the control knob sub-assembly.

  1. Passenger Side:

    1. E135067
      Engage the 3 claws and install the control knob sub-assembly.

  1. E135066
    Install the switch control sub-assembly with the 5 screws.

  1. E135006
    Engage the 4 claws and install the control panel case.


2. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY

  1. E135007
    Engage the 4 claws and install the ornament.

  1. E135005
    Engage the 4 claws.

  1. Install the air conditioning panel sub-assembly with the 5 screws.

← DISASSEMBLY (from Jun 2006)INSTALLATION (Jun 2006 – Sep 2006) →