INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL GSM ANTENNA |
Install the GSM antenna.
Install the 2 bolts.
- Torque:
- 3.0 N*m{ 31 kgf*cm , 27 in.*lbf }
Connect the GSM antenna connector.
| 2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) |
- HINT:
- Follow the steps for installing the package tray trim panel assembly (Click here).
| 3. CONNECT BATTERY |
Connect the negative battery cable to the battery.
| 4. PLACE MAYDAY ECU IN ACTIVE MODE |
Using the diagnostic tool, place the mayday ECU into Active mode, refer to TDT System Functions (Click here).
- NOTICE:
- If the mayday ECU Service mode is not disabled, the system will not have full functionality.
