INSTALLATION
Removal / installation · Vehicles built from Jun 2009
| 1. INSTALL STOP LIGHT CONTROL RELAY |
Connect the connector.

Engage the clamp to install the stop light control relay.
| 2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL |
Install the air hose and connect the connector.

Engage the 2 claws and the DLC3.
Engage the claw and the 4 clips.
Install the lower No. 1 instrument panel finish panel with the screw <B> and bolt <A>.
| 3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
Engage the 2 clips.

Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 4. INSTALL FRONT DOOR SCUFF PLATE LH |
Engage the 7 claws and 3 clips, then install the front door scuff plate LH.

