INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

If the operation cannot be done as specified, replace the park/neutral position switch.Standard resistance: Tester Connection
Shift Position
Specified Condition
1 (RB) - 3 (PL)
4 (B) - 9 (L)
P
Below 1 Ω
Except P
10 kΩ or higher
2 (RL) - 1 (RB)
R
Below 1 Ω
Except R
10 kΩ or higher
1 (RB) - 8 (NL)
4 (B) - 9 (L)
N
Below 1 Ω
Except N
10 kΩ or higher
1 (RB) - 7 (DL)
D, S, "+" and "-"
Below 1 Ω
Except D, S, "+" and "-"
10 kΩ or higher
