2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL SYMBOL EMBLEM

HINT:
When installing the symbol emblem, heat the luggage compartment door outside garnish and symbol emblem using a heat light.

Heating Temperature:
Item
Temperature
Luggage compartment door outside garnish
40 to 60°C (104 to 140°F)
Symbol emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the luggage compartment door outside garnish and symbol emblem excessively.

  1. Clean the luggage compartment door outside garnish surface.

    1. Using a heat light, heat the luggage compartment door outside garnish surface.

    2. Remove the double-sided tape from the luggage compartment door outside garnish.

    3. Wipe off any tape adhesive residue with cleaner.

  1. B137026
    Clean the symbol emblem (if reusing the symbol emblem).

    1. Using a heat light, heat the symbol emblem.

    2. Remove the double-sided tape from the symbol emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the symbol emblem.

  1. Install the symbol emblem.

    1. Using a heat light, heat the luggage compartment door outside garnish and symbol emblem.

    2. Remove the release paper from the symbol emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the symbol emblem.


2. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
  1. w/o Smart Entry and Start System: (Click here)
  2. w/ Smart Entry and Start System: (Click here)

3. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Smart Entry and Start System)

  1. w/o Rear View Monitor System:

    1. B212895
      Install the luggage door opening switch assembly with the 2 screws.

    2. Engage the 2 clamps.

  1. w/ Rear View Monitor System:

    1. B212894
      Install the luggage door opening switch assembly with the 2 screws.

    2. Engage the 2 clamps.

    3. Connect the connector.


4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY

  1. B135462
    Engage the 2 clips and install the luggage compartment door outside garnish assembly.

  1. B135460
    Install the 3 nuts.


5. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

  1. B136497
    Install the luggage compartment door lock cylinder assembly with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. B136496
    Connect the cable and connector.

  1. B136492
    Connect the rod.


6. INSTALL LUGGAGE COMPARTMENT DOOR COVER

  1. B135458
    Install the luggage compartment door cover with the 13 clips.

← INSTALLATION (Jun 2006 – May 2009)COMPONENTS (Oct 2006 – May 2009) →