Panel Switches do not Function
Circuit diagnosis · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK PANEL SWITCH |
 |
Check for foreign matter around the switches that might prevent operation.
- OK:
- No foreign matter is found.
|
NG |
 |
|
| REMOVE ANY FOREIGN MATTER FOUND |
|
|
| OK |
|
 |
|
| 2. CHECK PANEL SWITCH (DISPLAY CHECK MODE) |
 |
Enter the "Display Check" mode (Panel Switch Check) (Click here).
Operate the abnormal switch and check if the switch name and status are correctly displayed.
- OK:
- The switch name and status are correctly displayed as operated.
|
NG |
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
| OK |
|
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|