Screen Flicker or Color Distortion
Circuit diagnosis · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK DISPLAY SETTING |
 |
- Enter the display quality adjustment screen.
Reset display settings (contrast, brightness) and check that the screen appears normal.
- OK:
- The display returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 2. CHECK CABIN |
 |
Check that the cabin temperature is higher than -20°C (-4°F).
- OK:
- The cabin temperature is higher than -20°C (-4°F).
|
NG |
 |
|
| HEAT CABIN AND RECHECK TEMPERATURE |
|
|
| OK |
|
 |
|
| 3. CHECK COLOR BAR (OPERATION CHECK) |
 |
- Enter the "Color Bar Check Mode" screen (Check Color Bar) (Click here).
Check that the color bars match the displayed names.
- OK:
- Color bars match the displayed names.
- Result:
Result
|
Proceed to
|
OK
|
A
|
NG (for 2GR-FE RHD)
|
B
|
NG (except 2GR-FE RHD)
|
C
|
|
B |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY (for 2GR-FE RHD) (Click here)
|
|
|
|
C |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY (except 2GR-FE RHD) (Click here)
|
|
|
| A |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|