2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Screen Flicker or Color Distortion

Circuit diagnosis · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING

  1. E137170E02
    Enter the display adjustment screen by pressing the "DISPLAY" switch.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

  1. E136208E01
    Press the "INFO" switch and then select "Screen Setting".

  1. E120097
    Set the "Switch Color" to "Green" (initial setting) and check if the display returns to normal.

    OK:
    Returns to normal.



NG
Go to step 2
OK

END

2. CHECK CABIN
  1. Check that the cabin temperature is warmer than -20°C (-4.0°F).

    OK:
    Cabin is warmer than -20°C (-4.0°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3. CHECK COLOR BAR (DISPLAY CHECK MODE)

  1. I100037E05
    Enter the "Display Check" mode (Color Bar Check) (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY
OK


4. CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE)
I100050E04
  1. Enter the "Navigation Check" mode (NAVI Color Bar Check) (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE


← Screen Flicker or Color Distortion (Jun 2006 – Sep 2006)Screen Flicker or Color Distortion (from Jun 2009) →