2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT SEAT ASSEMBLY
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. B147683
    Temporarily install the front side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B147684
    Temporarily install the rear side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


2. INSTALL OUTER SEAT TRACK BRACKET COVER

  1. B147713
    Engage the 4 claws and install the front seat rear outer track bracket cover.


3. INSTALL INNER SEAT TRACK BRACKET COVER
  1. Engage the 4 claws and install the front seat rear inner track bracket cover.


4. INSTALL FRONT SEAT HEADREST ASSEMBLY

5. INSPECT SRS WARNING LIGHT
(Click here)

6. INSPECT FRONT SEAT ASSEMBLY
  1. Inspect the power seat operation.

← REASSEMBLY (from Jun 2009)INSTALLATION (from Jun 2009) →