REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 2. REMOVE OUTER SEAT TRACK BRACKET COVER |
Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
Using a screwdriver, disengage the 4 claws and remove the front seat rear outer track bracket cover.

- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE INNER SEAT TRACK BRACKET COVER |
Using a screwdriver, disengage the 4 claws and remove the front seat rear inner track bracket cover.
- HINT:
- Tape the screwdriver tip before use.
| 4. REMOVE FRONT SEAT ASSEMBLY |
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front seat track bracket.

Operate the power seat switch knob and move the seat to the position farthest forward.
Remove the 2 bolts on the rear seat track bracket.

Disconnect the cable from the negative (-) battery terminal.
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).
Disconnect the connectors under the seat. Then remove the front seat assembly.
