PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| Symptom |
Suspected Area |
See page |
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Open in CAN Main Bus Wire" |
Open in CAN Main Bus Line |
Click here
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short in CAN Bus Wires" |
Short in CAN Bus Line |
Click here
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short to B+ in CAN Bus Wire" |
Short to B+ in CAN Bus Line |
Click here
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short to GND in CAN Bus Wire" |
Short to GND in CAN Bus Line |
Click here
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Open in One Side of CAN Branch Wire" |
Open in One Side of CAN Branch Line |
Click here
|
| Symptom |
Suspected Area |
See page |
| "ABS/VSC/TRC" is not displayed on the intelligent tester |
Skid Control ECU Communication Stop Mode |
Click here
|
| "Air Conditioner" is not displayed on the intelligent tester |
Air Conditioning Amplifier Communication Stop Mode |
Click here
|
| "Main Body" is not displayed on the intelligent tester |
Main Body ECU Communication Stop Mode |
Click here
|
| "Engine" and "ECT" are not displayed on the intelligent tester |
ECM Communication Stop Mode |
Click here
|
| "Combination Meter" is not displayed on the intelligent tester |
Combination Meter ECU Communication Stop Mode |
Click here
|
| "SRS Airbag" is not displayed on the intelligent tester |
Center Airbag Sensor Communication Stop Mode |
Click here
|