2006-2011 Camry Aurion · Service Manual COMMUNICATION SYSTEM

FAIL-SAFE CHART

System information · Vehicles built from Oct 2006


FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus wires (communication wires) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.

  2. The following chart shows the relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)

    Function
    Control Master
    System Related
    Condition When Communication Impossible
    DTC Detection (Driver Detectable)
    VSC control*1 (Controls driving force while VSC in operation)
    Skid Control ECU
    1. ECM
    2. Steering Angle Sensor
    3. Yaw Rate Sensor
    Control is inoperative (VSC control gradually stops)
    U0073, U0100, U0123 U0124, U0126 (VSC warning light comes on)
    ABS control (Controls driving force while ABS in operation)
    Skid Control ECU
    Yaw Rate Sensor*1
    Control is inoperative (ABS control gradually stops)
    U0073, U0124 (ABS warning light comes on)
    Air conditioning control
    Air Conditioning Amplifier
    1. ECM
    2. Combination Meter
    3. Main Body ECU
    Air conditioning function stops
    B1499 (Air conditioning inoperative)
    Buzzer control
    Combination Meter
    1. ECM
    2. Center Airbag Sensor Assembly
    Buzzer function stops
    U0100, U0129 (Buzzer does not sound)
    Illumination control
    Main Body ECU
    1. ECM
    2. Combination Meter
    Light illumination rheostat inoperative
    None (Rheostat inoperative)
    Meter display
    Combination Meter
    1. ECM
    2. Skid Control ECU
    3. Center Airbag Sensor Assembly
    4. Main Body ECU
    Light does not come on, illuminates abnormally, or blinks abnormally
    U0100, U0129 (Abnormal display)
    Clearance sonar function *2(Informs driver when an obstacle is detected)
    Clearance Warning ECU
    1. ECM
    2. Combination Meter
    3. Main Body ECU
    Clearance sonar function stops
    None
    (Clearance sonar main switch indicator does not come on)
    *1: with VSC
    *2: with TOYOTA parking assist-sensor system

← DIAGNOSIS SYSTEM (from Jun 2009)DIAGNOSTIC TROUBLE CODE CHART (from Oct 2006) →