FAIL-SAFE CHART
System information · Vehicles built from Oct 2006
| FAIL-SAFE FUNCTION |
When communication fails in any of the CAN bus wires (communication wires) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.
The following chart shows the relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)
*1: with Seat position memoryFunction
(Function Description)
Control Master
System Related
Fail-safe Operation
DTC
(Driver Detectable)
ABS control
(Control driving force while ABS in operation)
Skid Control ECU
Yaw Rate Sensor
Control inoperative
(gradually stops controlling during ABS control)
U0073, U0124
(Warning light comes on)
VSC control
(Controls driving force while VSC in operation)
Skid Control ECU
- ECM
- Steering Angle Sensor
- Yaw Rate Sensor
VSC control is inoperative
(VSC control gradually stops)
U0073, U0100, U0123, U0124, U0126
(VSC warning Light comes on)
Buzzer control
Combination Meter
- ECM
- Center Airbag Sensor Assembly
- Certification ECU
- Main Body ECU
Buzzer function stops
U0100, U0129
(Buzzer does not sound)
Meter display (Displays operation condition and DTCs)
Combination Meter
- ECM
- Skid Control ECU
- Center Airbag Sensor Assembly
- Certification ECU
- Main Body ECU
- AFS ECU
Light does not come on, illuminates abnormally, or blinks abnormally
U0100, U0129
(Abnormal light illumination)
Air conditioning control
Air Conditioning Amplifier
- ECM
- Combination Meter
- Main Body ECU
Air conditioning function and PTC heater function stop
B1499
(Air conditioning system inoperative)
Illumination control
Main Body ECU
- ECM
- Combination Meter
- Clearance Warning ECU
Light illumination rheostat inoperative
None
(Rheostat control inoperative)
Smart entry / Power door lock control
Certification ECU
- Combination Meter
- Main Body ECU
Unlock permitted
B1207, B2326
(Wireless door lock cannot operate)
Security function
Certification ECU
Main Body ECU
Security function is inoperative (Theft deterrent system cannot be set)
B1207, B2326
(Security indicator light does not come on)
Clearance sonar function (Informs driver when an obstacle is detected)
Clearance Warning ECU
- ECM
- Combination Meter
- Main Body ECU
Clearance sonar function stops
None
(Clearance sonar main switch indicator does not come on)
Mirror surface adjustment/power retracting function (*1)
Outer Mirror Control ECU
Main Body ECU
Mirror surface adjustment/power retracting function is inoperative
None
(Mirror adjustment inoperative)
Mirror automatic retracting/mirror tilt reverse-link function (*1)
Outer Mirror Control ECU
- ECM
- Main Body ECU
Mirror automatic retracting/mirror tilt reverse-link function is inoperative
None
(Mirror adjustment inoperative)
Step light illumination function (*1)
Outer Mirror Control ECU
- Main Body ECU
- Certification ECU
Step illumination is inoperative
None
(Step illumination inoperative)
D seat and mirror positions memorizing/restoring function (*1)
Seat Position Control ECU (Front RH Side)
- ECM
- Combination Meter
- Main Body ECU
- Outer Mirror Control ECU
Positions cannot be memorized or restored
None
(Position memorizing/restoring function inoperative)
Memory call registration/restoration function (*1) (Registration/restoration of positions for each smart/wireless key)
Seat Position Control ECU (Front RH Side)
- Main Body ECU
- Certification ECU
- Outer Mirror Control ECU
Positions cannot be registered or restored
None
(Position registration/restoration inoperative)
AFS control (*2) (Headlight left/right angle control)
AFS ECU
- ECM
- Skid Control ECU
- Steering Angle Sensor
- Main Body ECU
Swivel control stops/leveling control continues
B2427
(AFS OFF indicator blinks)
CAN MS bus monitoring function
Main Body ECU
- Certification ECU
- Outer Mirror Control ECU
- Seat Position Control ECU (Front RH Side)
- Clearance Warning ECU
Communication error is detected
B1207, B1272, B1276, B1297, B2326
(Not detectable)
CAN No. 2 bus monitoring function (*2)
Gateway ECU
AFS ECU
Communication error is detected
U0182, U1002
(Not detectable)
*2: with Adaptive front-lighting system- ECM