2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE BATTERY

  1. A134906
    Loosen the bolt and nut, and remove the battery clamp.

  1. Remove the battery and battery tray.


3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

  1. C135109
    Remove the nut from the control shaft lever.

  1. Disconnect the transmission control cable assembly from the control shaft lever.

  1. C135705
    Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

    NOTICE:
    Do not hold the resin guide pipe.


4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C135706
    Disconnect the park/neutral position switch connector.

  1. C135707
    Remove the nut, washer and control shaft lever.

  1. C135708
    Using a screwdriver, pry up the lock plate.

  1. C135709
    Remove the lock nut and the lock plate.

  1. C135710
    Remove the 2 bolts and pull out the park/neutral position switch.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (Jun 2006 – May 2009) →