2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE MANUAL TRANSAXLE ASSEMBLY
Click here.

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

  1. C069774
    Remove the clutch release fork with the clutch release bearing from the transaxle assembly.


3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
  1. Remove the release bearing hub clip and clutch release bearing assembly from the clutch release fork.


4. REMOVE RELEASE FORK SUPPORT

  1. C083809
    Remove the release fork support from the manual transaxle assembly.


5. REMOVE CLUTCH RELEASE FORK BOOT

6. REMOVE CLUTCH COVER ASSEMBLY

  1. D008941E02
    Put matchmarks on the clutch cover assembly and flywheel sub-assembly.

  1. Loosen the 6 bolts one turn at a time until spring tension is released.

  1. Remove the 6 bolts and pull off the clutch cover assembly.

    NOTICE:
    Do not drop the clutch disc assembly.


7. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc assembly, the pressure plate and surface of the flywheel sub-assembly away from oil and foreign matter.

← DISASSEMBLY (Jun 2006 – Sep 2006)DISASSEMBLY (from Jun 2009) →