DISASSEMBLY
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE MANUAL TRANSAXLE ASSEMBLY |
 |
Click here.
| 2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
 |
- Remove the clutch release fork with the clutch release bearing from the transaxle assembly.
| 3.
REMOVE CLUTCH RELEASE BEARING ASSEMBLY |
 |
Remove the release bearing hub clip and clutch release bearing assembly from the clutch release fork.
| 4.
REMOVE RELEASE FORK SUPPORT |
 |
- Remove the release fork support from the manual transaxle assembly.
| 5.
REMOVE CLUTCH RELEASE FORK BOOT |
|
| 6.
REMOVE CLUTCH COVER ASSEMBLY |
 |
- Put matchmarks on the clutch cover assembly and flywheel sub-assembly.
Loosen the 6 bolts one turn at a time until spring tension is released.
Remove the 6 bolts and pull off the clutch cover assembly.
- NOTICE:
- Do not drop the clutch disc assembly.
| 7.
REMOVE CLUTCH DISC ASSEMBLY |
 |
- NOTICE:
- Keep the lining part of the clutch disc assembly, the pressure plate and surface of the flywheel sub-assembly away from oil and foreign matter.