2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  1. B152774
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144605
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B144599
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


4. REMOVE UPPER CONSOLE PANEL

  1. B144607E01
    Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.

  1. B144602
    Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.


5. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY

  1. B144604
    Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.


6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

  1. C132951
    Remove the 2 clips and disconnect the end of the transmission control cable.

  1. C135402E01
    Pull out the control cable assembly locks.

  1. C132953
    Turn the adjust nut 180° clockwise. While holding the adjust nut, separate the control cable assembly.


7. REMOVE FLOOR SHIFT LEVER ASSEMBLY

  1. C132955
    Remove the 4 bolts and shift lever assembly.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →