REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
| 2.
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.
| 3.
REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.
| 4.
REMOVE UPPER CONSOLE PANEL
|
 |
- Open the lid of the upper console panel.
Apply protective tape to the area shown in the illustration.
- Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.
| 5.
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY
|
 |
- Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.
| 6.
DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
 |
- Remove the 2 clips and disconnect the end of the transmission control cable.
- Pull out the control cable assembly locks.
- Turn the adjust nut 180° clockwise. While holding the adjust nut, separate the control cable assembly.
| 7.
REMOVE FLOOR SHIFT LEVER ASSEMBLY |
 |
- Remove the 4 bolts and shift lever assembly.