INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH |
Hold the front differential pinion to the front differential case side. Using a dial indicator, measure the front differential side gear backlash.

- Standard backlash:
- 0.05 to 0.20 mm (0.002 to 0.0079 in.)
| INSPECT FRONT DIFFERENTIAL PINION THRUST WASHER |
Using a micrometer, measure the thickness of the front differential pinion thrust washer.

- Minimum thickness:
- 0.9 mm (0.035 in.)
| INSPECT NO. 1 FRONT DIFFERENTIAL PINION SHAFT |
Using a micrometer, measure the outside diameter of the No. 1 front differential pinion shaft.

- Minimum diameter:
- 17.975 mm (0.70768 in.)
