2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. REMOVE SPEEDOMETER DRIVE GEAR

  1. C083559
    Remove the speedometer drive gear from the front differential case assembly.


2. REMOVE FRONT DIFFERENTIAL RING GEAR

  1. C083560E01
    Put matchmarks on the front differential ring gear and the front differential case.

  1. C083561
    Remove the 16 bolts.

  1. Using a plastic hammer, remove the front differential case.


3. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

  1. C092887E01
    Using SST and a hammer, unstake the staked part of the front differential case.
    SST
    09930-00010  

  1. C083564
    Using a pin punch and a hammer, remove the front differential pinion shaft straight pin from the front differential case.


4. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT

  1. C083565
    Remove the No. 1 front differential pinion shaft from the front differential case.


5. REMOVE FRONT DIFFERENTIAL SIDE GEAR

  1. C083566
    Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears, and 2 No. 1 front differential side gear thrust washers from the front differential case.

    HINT:
    Remove the 2 pinion thrust washers and side gear thrust washers while turning the front differential pinion.

← COMPONENTS (from Jun 2006)INSPECTION (from Jun 2006) →