HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use this procedure to troubleshoot the theft deterrent system.
- The intelligent tester should be used in step 3.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.CUSTOMER PROBLEM ANALYSIS |
Interview the customer to confirm the trouble (Click here).
| NEXT |
|
 |
|
|
| 3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM |
Use the intelligent tester to check that the CAN communication system functions normally.
- Result:
Result
|
Proceed to
|
CAN DTC is not output
|
A
|
CAN DTC is output
|
- for LHD (Click here)
- for RHD (Click here)
|
| A |
|
 |
|
|
| NEXT |
|
 |
|
|
If the fault is not listed in the problem symptoms table, proceed to A.
If the fault is listed in the problem symptoms table, proceed to B.
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 6.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM |
System description (Click here)
Terminals of ECU (Click here)
| 7.ADJUST, REPAIR OR REPLACE |
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|