2006-2011 Camry Aurion · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. SECURE FRONT SHOCK ABSORBER WITH COIL SPRING

  1. C140711E01
    As shown in the illustration, secure the front shock absorber with coil spring in a vise using aluminum plates by clamping onto a double nutted bolt affixed to the bracket at the bottom of the absorber.


2. REMOVE FRONT SHOCK ABSORBER

  1. C132416E01
    Using SST, compress the front coil spring.
    SST
    09727-30021   (09727-00010, 09727-00021, 09727-00031)

    NOTICE:
    Do not use an impact wrench.

    HINT:
    If the front coil spring is compressed at an angle, using 2 SST will make the work easier.

  1. Remove the lock nut.

  1. Remove the front suspension support sub-assembly, front suspension support bearing, upper front coil spring seat, upper front coil spring insulator, front coil spring, front spring bumper, and lower front coil spring insulator from the front shock absorber.

← REMOVAL (from Jun 2006)INSPECTION (from Jun 2006) →