REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedures for the RH side and the LH side.
- The procedures listed below are for the LH side.
| 1.
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
 |
- HINT:
- Refer to the instructions for removal of the engine assembly (Click here).
| 2.
REMOVE ENGINE MOUNTING INSULATOR |
 |
- Remove the 3 nuts and the engine mounting insulator.
| 3.
REMOVE FRONT SUSPENSION LOWER NO. 1 ARM |
 |
- Remove the 3 bolts and the nut on the front suspension lower No. 1 arm and remove the front suspension lower No. 1 arm from the front frame assembly.
Remove the front lower arm bushing stopper.