2006-2011 Camry Aurion · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
  1. Use the same procedures for the RH side and the LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT:
Refer to the instructions for removal of the engine assembly (Click here for 2AZ-FE, Click here for 2GR-FE).


2. REMOVE ENGINE MOUNTING INSULATOR

  1. C138032E01
    Remove the 3 nuts and the engine mounting insulator.


3. REMOVE FRONT SUSPENSION LOWER NO. 1 ARM

  1. C144659
    Remove the 3 bolts and the nut on the front suspension lower No. 1 arm and remove the front suspension lower No. 1 arm from the front frame assembly.

  1. Remove the front lower arm bushing stopper.

← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Jun 2006 – Sep 2006) →