DISASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. SECURE REAR SHOCK ABSORBER WITH COIL SPRING |
As shown in the illustration, secure the rear shock absorber with coil spring in a vise using aluminum plates by closing the vise onto the double nutted bolt affixed to the bracket at the bottom of the absorber.

| 2. REMOVE REAR SHOCK ABSORBER |
Using SST, compress the rear coil spring.

- SST
- 09727-30021
(09727-00010, 09727-00021, 09727-00031)
- NOTICE:
- Do not use an impact wrench.
- HINT:
- If the rear coil spring is compressed at an angle, using 2 SST will make the work easier.
Remove the lock nut.
Remove the rear shock absorber collar and rear suspension support assembly.
Remove the rear coil spring, No. 1 rear spring bumper, and lower rear coil spring insulator.
