REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Remove the bolt, and separate the No. 3 parking brake cable assembly.

| 3. REMOVE REAR STRUT ROD |
Support the rear axle carrier with a jack.

Remove the bolt and nut, and disconnect the rear strut rod (front side).

- NOTICE:
- When removing the bolt, keep the nut from rotating.
Remove the bolt, nut and strut rod from the rear axle carrier.

- NOTICE:
- When removing the bolt, keep the nut from rotating.
