HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use the following procedures to troubleshoot the key reminder warning system.
- The intelligent tester should be used in steps 3 and 5.
- Use the following procedures to troubleshoot the key reminder warning system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
Measure the battery voltage.
- Standard voltage:
- 10 to 14 V
| |||||
| 3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM |
Use the intelligent tester to check if the CAN communication system is functioning normally.
- Result:
Result
Proceed to
(ECU connected, communication line malfunctioning) If no code is output.
A
(ECU connected, communication line malfunctioning) If code is output.
B
for LHD: Click here
for RHD: Click here
|
|||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
If the fault is not listed in the problem symptoms table, proceed to A.
If the fault is listed in the problem symptoms table, proceed to B.
|
|||||
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING |
DATA LIST / ACTIVE TEST (Click here)
TERMINALS OF ECU (Click here)
| |||||
| 6.REPAIR OR REPLACE |
| |||||
| 7.CONFIRMATION TEST |
| |||||